Minmin Yan | Nano Energy Materials | Research Excellence Award

Published on by MTE Awards

Assoc. Prof. Dr. Minmin Yan | Nano Energy Materials | Research Excellence Award

Associate Professor at Nanjing University of Science and Technology | China

Assoc. Prof. Dr. Minmin Yan, Associate Professor at Nanjing University of Science and Technology, excels in designing high-performance nano-catalysts for sustainable energy conversion. His work focuses on carbon-based single-atom catalysts and Pt-based intermetallic nanoparticles, addressing challenges in catalyst stability and oxygen utilization for water electrolysis, H₂O₂ synthesis, and hydrogen fuel cells. With over 25 Scopus-indexed publications in top journals (Nat. Commun., Adv. Mater., ACS Nano), 2,208 citations, and an h-index of 21, he has also secured multiple patents and international collaborations. His innovative contributions significantly advance green energy technologies, reflecting outstanding research excellence and global impact.

Citation Metrics (Scopus)

2500

1500

500

50

0

Citations
2,208

Documents
25

h-index
21

Featured Publications


Low‐Coordinated Co–N–C on Oxygenated Graphene for Efficient Electrocatalytic H2O2 Production
– Advanced Functional Materials 32 (5), 2106886, 2022, Citations: 199

Mudassir Hussain Tahir | Pyrolysis | Best Researcher Award

Published on by MTE Awards

Dr. Mudassir Hussain Tahir | Pyrolysis | Best Researcher Award

Associate Professor at Nanjing Forestry University | China

Dr. Mudassir Hussain Tahir is a highly accomplished researcher whose prolific scientific contributions and multidisciplinary impact make him an exceptional candidate for the Best Researcher Award. With 2,411 citations, 119 peer-reviewed publications, and an impressive Scopus h-index of 27, he has established a strong global research footprint in biomass thermochemical conversion, catalytic pyrolysis, heterogeneous catalyst development, sustainable hydrogen-rich syngas production, CO₂ adsorption, bio-based chemical synthesis, and machine-learning-assisted materials discovery. His work has advanced fundamental understanding of pyrolysis kinetics, reactor design, catalyst–feedstock interactions, and waste-to-energy pathways, leading to high-value bio-oils, green chemicals, and sustainable aviation fuel precursors. He has published influential articles in leading journals such as Energy & Fuels, Bioresource Technology, Fuel, International Journal of Hydrogen Energy, Journal of Analytical and Applied Pyrolysis, ACS Omega, and Applied Thermal Engineering, covering both experimental innovation and computational materials design. His research also integrates advanced data-driven methodologies for designing organic semiconductors, dyes, polymers, and photovoltaic materials, positioning him at the frontier of clean energy materials research. In addition to his extensive publication record, he has served as Guest Editor and Review Editor for reputable journals, reflecting strong leadership and recognition within the scientific community. His contributions span renewable energy, waste valorization, catalysis, environmental sustainability, and predictive materials chemistry, demonstrating both depth and breadth in research excellence. Dr. Tahir’s sustained scholarly productivity, high citation impact, and transformative contributions to biomass energy and materials innovation exemplify the qualities of a distinguished and forward-thinking scientist, making him thoroughly deserving of the Best Researcher Award.

Profiles : Scopus | ORCID | Google Scholar

Featured Publications

Sabi William Konsago | Ferroelectric Materials | Excellence in Research Award

Published on by MTE Awards

Dr. Sabi William Konsago | Ferroelectric Materials | Excellence in Research Award

Postdoctoral Researcher at Jožef Stefan Institute | Slovenia

Dr. Sabi William Konsago is an emerging researcher in electronic ceramics whose work focuses on the development, structural engineering, and functional optimization of lead-free ferroelectric and piezoelectric oxide materials, with a particular emphasis on Ba(Zr,Ti)O₃–(Ba,Ca)TiO₃ thin films prepared by chemical solution deposition. With 20 citations, 5 Scopus-indexed publications, and an h-index of 2, he has established a strong research footprint in the field through contributions that address fundamental and application-driven challenges in designing high-performance dielectric and electromechanical materials. His research advances understanding of how chemical formulation, solvent selection, and thermal-processing conditions influence microstructure, crystallographic orientation, domain behavior, and energy-storage efficiency in complex oxide thin films. He has developed novel ethylene-glycol-based precursor systems, optimized processing routes for improved film uniformity, and demonstrated pathways to enhance dielectric properties, breakdown strength, and electromechanical responses, leading to results published in internationally recognized journals such as Journal of Materials Chemistry A, Journal of Alloys and Compounds, ACS Applied Electronic Materials, Journal of Materials Chemistry C, and Molecules. His work is characterized by the integration of advanced characterization techniques, including XRD, SEM, AFM, SIMS, XPS, dielectric spectroscopy, and electromechanical testing, to correlate processing parameters with functional performance. Beyond thin films, his contributions also include investigations of bulk ceramics and structure–property relationships in high-entropy and multifunctional oxides. Through active participation in international conferences and collaborative projects, he has contributed to the broader advancement of sustainable, lead-free electronic materials and demonstrated potential for long-term scientific impact.

Profiles : Scopus | ORCID | Google Scholar

Featured Publications

Konsago, S. W., Žiberna, K., Kmet, B., Benčan, A., Uršič, H., & Malič, B. (2022). Chemical solution deposition of barium titanate thin films with ethylene glycol as solvent for barium acetate. Molecules, 27(12), 3753. (Cited by: 18)

Konsago, S. W., Žiberna, K., Matavž, A., Mandal, B., Glinšek, S., Fleming, Y., Benčan, A., Brennecka, G. L., Uršič, H., & Malič, B. (2024). Engineering the microstructure and functional properties of 0.5Ba(Zr0.2Ti0.8)O₃–0.5(Ba0.7Ca0.3)TiO₃ thin films. ACS Applied Electronic Materials, 6(6), 4467–4477. (Cited by: 6)

Konsago, S. W., Debevec, A., Cilenšek, J., Kmet, B., & Malič, B. (2023). Linear thermal expansion of 0.5Ba(Zr0.2Ti0.8)O₃–0.5(Ba0.7Ca0.3)TiO₃ bulk ceramic. Informacije MIDEM, 53(4), 233–238. (Cited by: 3)

Konsago, S. W., Žiberna, K., Matavž, A., Mandal, B., Glinšek, S., Brennecka, G. L., Uršič, H., & Malič, B. (2025). High energy storage density and efficiency of 0.5Ba(Zr0.2Ti0.8)O₃–0.5(Ba0.7Ca0.3)TiO₃ thin films on platinized sapphire substrates. Journal of Materials Chemistry A, 13(4), 2911–2919. (Cited by: 1)

Konsago, S. W., Žiberna, K., Ekar, J., Kovač, J., & Malič, B. (2024). Designing the thermal processing of Ba(Ti0.8Zr0.2)O₃–(Ba0.7Ca0.3)TiO₃ thin films from an ethylene glycol-derived precursor. Journal of Materials Chemistry C, 12(36), 14658–14666.

Jei Pil Wang | Extraction of Rare Earth Elements | Editorial Board Member

Published on by MTE Awards

Prof. Jei Pil Wang | Extraction of Rare Earth Elements | Editorial Board Member

Professor at Pukyong National University | South Korea

Professor Jei-Pil Wang is a highly accomplished researcher in metallurgical engineering, recognized for his strong contributions to extractive metallurgy, chemical metallurgy, powder fabrication, and sustainable recycling processes. His scholarly influence is evident through 781 citations, 126 published documents, and an h-index of 13 in Scopus, reflecting a career marked by steady research productivity and global academic engagement. His work advances key areas such as metallurgical reaction mechanisms, thermochemical behavior, and process optimization, offering important insights into improving metal extraction routes and developing efficient powder fabrication methods. A significant portion of his research focuses on environmentally conscious recycling technologies, aligning with modern demands for resource sustainability and industrial waste reduction. His publications demonstrate a balanced integration of experimental rigor, analytical interpretation, and practical applicability, making his research valuable both to academia and industry. Professor Wang’s studies often bridge theoretical metallurgical principles with real-world processing challenges, contributing to technological advancements that enhance operational efficiency and environmental compliance. His body of work reflects a commitment to scientific clarity, methodological precision, and research relevance-qualities that are essential for maintaining editorial standards in high-quality journals. His ability to evaluate complex metallurgical problems, combined with a demonstrated record of producing impactful, peer-reviewed research, positions him strongly for responsibilities such as manuscript assessment, publication guidance, and strategic editorial decision-making. Given his experience, citation strength, and multidisciplinary research alignment, he is highly suitable for serving as an Editorial Board Member in journals focused on metallurgy, materials science, and sustainable metallurgical process development.

Profiles : Scopus | ORCID

Featured Publications

Urtnasan, E., Kim, C.-J., Chung, Y.-J., & Wang, J.-P. (2025). Selective recovery of rare earth elements from electric motors in end-of-life vehicles via copper slag for sustainability. Processes.

Lee, H., & Wang, J.-P. (2025). Design and implementation of a fire-responsive cooling–suppression integrated system for mitigating fire risks in data-center GPU servers. International Journal of Innovative Research and Scientific Studies.

Yeo, Y.-H., & Wang, J.-P. (2025). A study on freezing technology for the safe storage and transportation of spent lithium-ion batteries. International Journal of Innovative Research and Scientific Studies.

Jung, S.-H., Jung, J.-M., & Wang, J.-P. (2025). Development of a discharge-free pre-treatment device for spent lithium-ion batteries under an inert atmosphere. International Journal of Innovative Research and Scientific Studies.

Park, Y. S., & Wang, J.-P. (2025). Effect of metal borides on the hardness and wear of STD11 steel. International Journal of Innovative Research and Scientific Studies.

 

Syeda Naveed Kazmi | Fluid Mechanics | Best Researcher Award

Published on by MTE Awards

Syeda Naveed Kazmi | Fluid Mechanics | Best Researcher Award

Lecturer at Mirpur University of Science and Technology | Pakistan

Dr. Syeda Naveed Kazmi is a Senior Lecturer in Mathematics at Mirpur University of Science and Technology (MUST), Pakistan, specializing in heat transfer analysis for peristaltic transport of Newtonian and non-Newtonian nanofluids. She completed her Ph.D. in Mathematics from COMSATS University Islamabad, following an M.Sc. from the University of Azad Jammu & Kashmir. Dr. Kazmi’s research focuses on fluid mechanics, computational fluid dynamics, and nanofluid heat transfer, with a particular emphasis on peristaltic transport mechanisms. She has authored several publications in international journals, including “Entropy generation analysis for hybrid nanofluid mobilized by peristalsis with an inclined magnetic field” in Advances in Mechanical Engineering and “Peristaltic flow under the effects of tilted magnetic field: enhancing heat transfer using graphene nanoparticles” in the International Journal of Modelling and Simulation. Additionally, her work on “Thermal analysis of hybrid nanoliquid containing iron-oxide (Fe3O4) and copper (Cu) nanoparticles in an enclosure” was published in Alexandria Engineering Journal. Her contributions to the field have been recognized internationally, and she continues to advance research in the areas of nanofluid dynamics and heat transfer. Dr. Kazmi’s academic journey reflects a commitment to excellence in research and education in applied mathematics.

Profile: ORCID | Google Scholar

Feautured Publications

Kazmi, S. N., Haq, R. U., & Mekkaoui, T. (2017). Thermal management of water based SWCNTs enclosed in a partially heated trapezoidal cavity via FEM. International Journal of Heat and Mass Transfer, 112, 972–982. Cited by 93.

Qin, H. L., Leng, J., Youssif, B. G. M., Amjad, M. W., Raja, M. A. G., Hussain, M. A., … Kazmi, S. N. (2017). Synthesis and mechanistic studies of curcumin analog‐based oximes as potential anticancer agents. Chemical Biology & Drug Design, 90(3), 443–449. Cited by 47.

Kazmi, S. N., Hussain, A., Rehman, K. U., & Shatanawi, W. (2024). Thermal analysis of hybrid nanoliquid contains iron-oxide (Fe3O4) and copper (Cu) nanoparticles in an enclosure. Alexandria Engineering Journal, 101, 176–185. Cited by 8.

Kazmi, S. N., Abbasi, F. M., & Shehzad, S. A. (2023). An electroosmotic peristaltic flow of graphene-lubrication oil nanofluid through a symmetric channel. Advances in Mechanical Engineering, 15(6), 16878132231177956. Cited by 5.

Kazmi, S. N., Abbasi, F. M., & Iqbal, J. (2024). Double diffusive convection for MHD peristaltic movement of Carreau nanofluid with Hall effects. Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems. Cited by 3.